How to Build an Alcohol Stove
by Max
Building an alcohol stove doesn’t require any fancy tools or expensive material. Depending on the type of stove you want to build, it might only be a little fiddling. There are many types of alcohol stoves and tons of material to find on the internet. We won’t go into detail here, but list three stoves, which can be (rather) easily build with costs close to 0$. The stoves of the listing increase in complexity and power output.
1. Open Flame
Open flame stove are basically just a tray non-flammable material. Any tray of the right size that can withstand extreme heat would work. What’s the right size? Good question! This depends on your pot and shouldn’t be taken to accurate! X-Boil for example recommends their ∅ 55 mm burner for ∅ 75-100 mm pots and their ∅ 70 mm burner for ∅ 90-145 mm pots.
Taking a opened food can or cutting the bottom of a aluminum can already work. Even better: a resealable aluminum or stainless steel tin with a little wick inserted.
2. Side Burner
While they require a little more work than just taking a tin, side burners are still very easy to make. There are a ton of different versions, but all of them have in common, that you place your pot directly on top of the stove, no pot-stand needed. On side burners this is possible because the flame come out of the sidewalls of the stove. See the Bikepacking.com Instructions (#1, #2, and #4) or the famous SuperCat Stove.
3. Jet Stoves
Jet stoves are inspired by the classic Trangia alcohol stove. They are a bit more difficult to build, but still, there’s no jet science behind it 🦗 The main ingredient is patience. Making a clean cut in an aluminum can with a cutter blade takes many repetitions. After that, it’s mostly a delicate touch—and maybe one or two failed attempts. And trust us: seeing the jet of your self-built jet take off is pretty amazing 🚀
3.1 Pressurized Jet Stoves
If you want to take your Jet Stove to the next level, build it pressurized. Either the famous Penny Stove which uses a coin to create the pressure (see Bikepacking.com Instructions #3) or one that uses a threaded rivet (see Bikepacking.com Instructions #5 or Zenstove’s Pressure Jet).



Comments
Thanks! It'll appear once a team member approves it.